COVESTRO BAYBLEND T65 PG Hot Sale PC/ABS Resin

Physical Properties

• Density: Measured in accordance with ISO 1183 – 1, the density is 1.13 g/cc (0.0408 lb/in³).
• Moisture Absorption at Equilibrium: As per ISO 62, the moisture absorption at equilibrium is 0.20 %.
• Water Absorption at Saturation: In accordance with ISO 62, the water absorption at saturation is 0.70 %.
• Viscosity: At a frequency of 1000 Hz and a temperature of 260 °C (500 °F), the viscosity in the melt is 200000 cP.
• Linear Mold Shrinkage:Per ISO 2577, 150×105×3 mm samples at 260°C/80°C, linear shrinkage 0.0050–0.0070 cm/cm (flow & transverse).
• Melt Flow: At a temperature of 260 °C (500 °F) under a load of 5.00 kg (11.0 lb), as per ISO 1133, the melt flow rate is 20.34 g/10 min.

Polymer Properties:

• Base Material：PC/ABS blend
• Key Properties：
  
  • High rigidity and dimensional stability for precise component manufacturing.
  • Excellent impact resistance at low (-30°C) and room (23°C) temperatures.
  • Good heat resistance with elevated thermal deformation temperatures.

Applications:

• Automotive：Used for instrument panels, door modules, and interior trims that need to withstand vehicle vibrations and temperature fluctuations while maintaining structural integrity.
• Electronics：Applied to laptop chassis, monitor frames, and industrial device housings, leveraging its mechanical strength and heat resistance for long-term reliable performance.