Physical Properties
- Density: Measured using injection-molded samples in accordance with ISO 1183, the density is 1.29 g/cc (0.0466 lb/in³) with 20% glass fiber filler.
- Moisture Absorption at Equilibrium: Determined by ISO 62, the moisture absorption at equilibrium is 0.20%.
- Water absorption at saturation:Determined by ISO 62,he water absorption at saturation is 0.40%.
- Viscosity: At 260°C and a shear rate of 1000 1/s, the melt viscosity is 205,000 cP (ISO 11443-A).
- Linear Mold Shrinkage: For 50x105x3 mm injection-molded plaques at 260°C/mold temperature 80°C, the linear mold shrinkage is 0.0020–0.0040 cm/cm (flow) and 0.0030–0.0050 cm/cm (transverse) as per ISO 2577.
- Melt Flow: As per ISO 1133, at 260°C under a load of 5.00 kg, the melt flow rate is 18.06 g/10 min.
Polymer Properties:
- Base Material: PC (Polycarbonate) + SAN (Styrene Acrylonitrile)
- Reinforcement: 20% Glass Fiber
- Modification Features:
- 20% glass fiber filling for high rigidity and dimensional stability.
- Excellent heat resistance for prolonged use in elevated-temperature environments.
- Optimized for heat aging and UV exposure in industrial applications.
Applications:
The unique balance of high heat resistance and exceptional mechanical strength makes Bayblend T88 GF-20 ideal for several critical applications.
- Automotive Under-the-Hood Components:This is a primary application area for this material. The high heat resistance and structural integrity are non-negotiable for parts in the engine bay.
- Industrial and Electrical Components:For industrial equipment and electrical systems that must operate in high-temperature or high-stress environments.
