SABIC 31T1010 Short Glass Modified PP Resin

Physical Properties

• Density: Measured with injection – molded samples following ISO 527 – 1A and ISO 1183, the density is 0.970 g/cc (0.0350 lb/in³).
• Filler Content: By the SABIC method, the filler content is 10 %.
• Linear Mold Shrinkage: Measured on a 65x65x3.2 mm injection – molded plaque via the SABIC method, it is 0.013 cm/cm (0.013 in/in).
• Melt Flow: Tested as per ISO 1133, at a load of 2.16 kg and 230 °C (446 °F), the melt flow is 11 g/10 min.

Polymer Properties:

1. Base Material: Polypropylene Copolymer
2. Reinforcement: 10% Talc Fillers
3. Modification Features:
   
   • 10% talc addition for improved performance
   • General-purpose suitability for various uses
   • Copolymer nature for enhanced properties
   • Talc-filled to optimize strength and stiffness

Applications:

1. Consumer Goods: Employed to make everyday items like small household product casings, leveraging its general-purpose capabilities.
2. Automotive: Used for non-critical interior parts that require a balance of cost and performance, such as minor trim pieces.
3. Packaging: Applied in injection-molded packaging solutions where a combination of strength and moldability is needed, like small containers.