SABIC 19T1030 Short Glass Modified PP Resin

Physical Properties

• Density: Measured from injection – molded samples based on ISO 527 – 1A and ISO 1183, the density is 1.16 g/cc (0.0419 lb/in³).
• Filler Content: Measured by the SABIC method, the filler content is 30 %.
• Linear Mold Shrinkage: Measured on a 65x65x3.2mm injection – molded plaque by the SABIC method, it is 0.0088 cm/cm (0.0088 in/in).
• Melt Flow: Tested as per ISO 1133, at a load of 2.16 kg and 230 °C (446 °F), the melt flow is 18.2 g/10 min.

Polymer Properties:

1. Base Material: Polypropylene Homopolymer
2. Reinforcement: Talc Fillers
3. Modification Features:
   
   • Talc addition for enhanced performance.
   • Heat stabilization for durability in various conditions.
   • High flow property for efficient injection molding.
   • General-purpose suitability for wide applications.

Applications:

The combination of high stiffness, heat resistance, and dimensional stability makes SABIC 19T1030 an excellent choice for a variety of structural and load-bearing applications, particularly in the automotive and appliance sectors.

• Automotive Parts: This material is commonly used for under-the-hood components, automotive trim panels, and dashboard panels that require high rigidity and thermal stability.
• Appliance Housings: Ideal for housings of appliances like washing machines or vacuum cleaners where a rigid, durable casing is necessary to protect internal components.
• Power Tool Casings: Suitable for parts that require high strength and rigidity to withstand stress and protect the motor and other internal mechanisms.