BASF Ultraform Z2320 003 POM Resin

Physical Properties

• Bulk Density: The bulk density of this POM is 0.850 g/cc (0.0307 lb/in³) without a specified test standard.
• Density: Measured following ISO 1183, the density of this material is 1.40 g/cc (0.0506 lb/in³).
• Moisture Absorption at Equilibrium: At 23°C and 50% RH, as per ISO 62, it is 0.20 %.
• Water Absorption at Saturation: Based on ISO 62, the water absorption at saturation is 0.80 %.
• Linear Mold Shrinkage, Flow: Measured by ISO 2577, the flow – direction value is 0.020 cm/cm (0.020 in/in).
• Linear Mold Shrinkage, Transverse: According to ISO 2577, the transverse value is 0.021 cm/cm (0.021 in/in).
• Melt Flow: Tested as per ISO 1133, at 190 °C (374 °F) under 2.16 kg (4.76 lb) load, it is 58.8 g/10 min.

Polymer Properties:

1. Base Material: Polyoxymethylene (POM)
2. Modification Features
   
   • High melt flow rate, enabling rapid and efficient injection molding of complex parts.
   • Good balance of mechanical properties, providing strength and flexibility as needed.
   • Moderate moisture absorption, maintaining dimensional stability in normal environments.
   • Decent chemical resistance, suitable for common industrial and consumer applications.

Applications:

1. Automotive: Used for components that require quick and precise molding, such as small clips and fasteners in the interior.
2. Electronics: Applied in producing connectors and small structural parts where efficient production is key.
3. Industrial Equipment: Employed in the manufacture of parts for automated machinery, where high – speed production and reliable performance are essential.