SABIC 15T1030 Short Glass Modified PP Resin

Physical Properties

• Density: Measured from injection – molded samples following ISO 527 – 1A and ISO 1183, the density is 1.15 g/cc (0.0415 lb/in³).
• Filler Content: Measured by the SABIC method, the filler content is 30 %.
• Linear Mold Shrinkage: Measured on a 65x65x3.2mm injection – molded plaque by the SABIC method, it is 0.0105 cm/cm (0.0105 in/in).
• Melt Flow: Tested as per ISO 1133, at a load of 2.16 kg and 230 °C (446 °F), the melt flow is 6.0 g/10 min.

Polymer Properties:

1. Base Material: Polypropylene Homopolymer
2. Reinforcement: 30% Talc Fillers
3. Modification Features:
   
   • 30% talc addition for high modulus
   • Good thermal stabilization for heat resistance
   • Tailored for under – bonnet use
   • Designed for automotive – grade performance

Applications:

The combination of high stiffness, heat resistance, and dimensional stability makes SABIC 15T1030 an excellent choice for a variety of structural and load-bearing applications, especially in the automotive and appliance industries.

• Automotive Parts: This material is commonly used for under-the-hood components, automotive trim panels, and dashboard panels that require high rigidity and thermal stability.
• Appliance Housings: Ideal for housings of appliances like washing machines or vacuum cleaners where a rigid, durable casing is necessary to protect internal components.
• Power Tool Casings: Suitable for parts that require high strength and rigidity to withstand stress and protect the motor and other internal mechanisms.