Celanese Zytel 80G33HS1L PA66 Resin

Physical Properties

• Density: Measured using injection-molded samples in accordance with DAM and ISO 1183, the density is 1.33 g/cc (0.0480 lb/in³).
• Melt Density: At a temperature of 295 °C (563 °F), the melt density is 1.12 g/cc (0.0405 lb/in³).
• Water Absorption: After 24h immersion (DAM, sim. ISO 62), water absorption is 0.85%; at 2.00 mm thickness (same standards), it’s 4.5%.
• Moisture Absorption: At 2.00 mm (0.0787 in) thickness, moisture absorption is 1.50% (DAM; sim. to ISO 62).
• Viscosity Number: Determined with 96% sulfuric acid per ISO 307, 1157, 1628, the viscosity number is 144 cm³/g (1.44 dl/g).
• Linear Mold Shrinkage: Per DAM/ISO 294-4/2577, injection-molded plaques have 0.0030 cm/cm (flow) and 0.0070 cm/cm (transverse) linear mold shrinkage.

Polymer Properties:

• Base Material: Polyamide 66 (PA66)
• Reinforcement: 33% Glass Fiber
• Modification Features:
  
  • 33% glass fiber reinforcement for superior rigidity and load-bearing capacity.
  • Toughened and heat-stabilized for durability in demanding industrial environments.
  • Optimized for high-performance applications requiring strength and heat resistance.

Applications:

1. Automotive: Engine manifolds, turbocharger brackets, and high-stress exhaust components in performance vehicles.
2. Industrial: Heavy-duty gears, shafts, and structural frames in mining, construction, or agricultural equipment.
3. Aerospace: Lightweight, high-strength components for aircraft engine compartments or landing gear systems.