Radici Radilon A HS 164 NT PA66 Resin

Physical Properties

• Density: As per ISO 1183 in DAM state, injection-molded parts exhibit a density of 1.14 g/cc (0.0412 lb/in³).
• Water Absorption: Tested at 23.0°C immersion (ISO 62), 2.00 mm samples show an 8.9% water absorption rate.
• Moisture Absorption: At 23.0°C and 50% RH (ISO 62), 2.00 mm specimens absorb 2.10% moisture under standard conditions.
• Linear Mold Shrinkage (Flow): Flow-direction shrinkage, per ISO 294-4, is recorded as 0.012 cm/cm (0.012 in/in) for molded components.
• Linear Mold Shrinkage (Transverse): Transverse shrinkage, tested in accordance with ISO 294-4, measures 0.014 cm/cm (0.014 in/in).

Polymer Properties:

• Base Material: PA66
• Modification Features:
  • Internally lubricated for fast cycling and high-productivity injection molding.
  • General-purpose grade for cost-effective production of standard parts.
  • Natural color for industrial applications requiring moderate performance.

Applications:

Radilon® A HS 164 NT is widely used in industries such as automotive, electrical/electronics, and industrial goods due to its versatility, high productivity, and robust performance. Below are its primary applications, supported by its material properties.

1. Fasteners
   • Application Description: Radilon® A HS 164 NT is extensively used for producing plastic fasteners such as clips, screws, and bolts. Its fast-cycling nature and internal lubrication enable high-speed production of these small, precise components.
   • Supporting Properties:
     • High Productivity: Fast cycling reduces molding time, allowing for large-scale production of fasteners.
     • Mechanical Strength: High stiffness and mechanical resistance ensure fasteners can withstand mechanical loads and maintain structural integrity.
     • Wear Resistance: Ensures durability in repetitive fastening applications.
     • Example Use Case: Automotive fasteners for securing interior panels or under-hood components, where chemical resistance to oils and fuels is critical.
2. Connectors
   • Application Description: This resin is ideal for manufacturing electrical and electronic connectors, such as those used in wiring harnesses or circuit board assemblies. Its excellent flowability allows for the production of complex, thin-walled connector designs.
   • Supporting Properties:
     • Electrical Insulation: Ensures safe performance in electrical applications.
     • Fast Cycling and Mold Release: Internal lubrication and rapid cycle times support high-throughput production of intricate connector geometries.
     • Chemical Resistance: Resists degradation from exposure to environmental chemicals, ensuring long-term reliability in connectors used in automotive or industrial settings.
     • Example Use Case: Multi-pin connectors for automotive wiring systems, where precision and durability are essential.
3. Cable Ties
   • Application Description: Radilon® A HS 164 NT is commonly used for producing cable ties, which require flexibility, strength, and ease of manufacturing. Its fast-cycling capability supports the high-volume production of these components.
   • Supporting Properties:
     • High Stiffness and Impact Resistance: Provides the necessary strength to secure cables under tension while maintaining flexibility for ease of use.
     • Wear Resistance: Ensures cable ties remain functional over repeated use or in abrasive environments.
     • Processing Efficiency: Fast cycling and internal lubrication reduce production costs and improve mold release for complex designs.
     • Example Use Case: Cable ties for organizing wiring in electrical panels or automotive assemblies, where resistance to environmental factors is crucial.
4. Automotive Components
   • Application Description: The resin is used in various automotive applications, including under-hood components and interior parts, due to its ability to withstand mechanical stress and chemical exposure.
   • Supporting Properties:
     • Chemical Resistance: Resists degradation from automotive fluids such as oils, fuels, and coolants.
     • Thermal Stability: Performs reliably in the elevated temperatures found in engine compartments.
     • Mechanical Strength: Supports the production of durable components like brackets, clips, and housings.
     • Example Use Case: Engine bay clips or brackets that require high stiffness and resistance to heat and chemicals.
5. Industrial and Consumer Goods
   • Application Description: employed in a variety of industrial and consumer goods, such as tool components, machinery parts, and household appliances.
   • Supporting Properties:
     • High Productivity: Fast cycling and excellent flowability enable cost-effective production of complex parts.
     • Wear and Impact Resistance: Ensures long-term durability in applications involving friction or mechanical stress.
     • Versatility: Suitable for a wide range of applications due to its balanced mechanical, thermal, and chemical properties.
     • Example Use Case: Components for power tools or appliance housings, where durability and efficient manufacturing are critical.